Report Highlights
The 3D metal print industry anticipates that solutions to obstacles faced by the metal additive manufacturing (AM) are ready to galvanize a ten-fold increase in AM-produced metal products by 2021.
Metal products produced by additive manufacturing had a value of about $210 million in 2016, a fraction of the $10-plus trillion global manufacturing market. By 2021, BCC Research predicts new SLM software, alongside consistent optimized powders, could drive this figure just more than $2 billion.
Report includes
- Analysis of the development of product qualification, certification method, and protocol that will be essential to replicable product characteristics.
- Insight into why improved process control software is needed to ensure consistent production of parts.
- Details on gas atomization optimization of metal powders tailored for AM.
- Details on improved beam control and in-process data gathering for SLM approaches.
Analyst Credentials
Chris Spivey has been Senior Editor at BCC Research for seven years, during which time he has directly overseen the publication of over 500 market research reports. He is the Cofounder of the Human Proteome Organization (HUPO) and has co-authored half a dozen scientific papers (in the field of Advanced Wavefront Transforms and Adaptive Optics). He holds undergraduate and graduate degrees from the University of Canterbury, New Zealand.
Chris has served as conference chair for a wide variety of sub disciplines: from Human Genetic Variation and Microarrays, to Gene Quantification and Biotech Startup Funding and Management. His consulting work includes Bulk Hetero-Junction CdS/CdTe thin film solar cells, Spinel LiMn2O4 as Li-ion Battery Cathode Material, Passivation of Laser Diode Micro Channel Coolers, Nanomaterial processes for Algal Biodiesel Fuel, General Nanoparticle manufacture from a "bottom-up" approach, and most recently modelling algorithms for physical vapor deposition systems.
He is co-author of the BCC Research FLASH reports
Andrew McWilliams spent more than 25 years as a consultant with Ernst & Young, McKinsey & Company and A.T. Kearny focused on manufacturing before segueing into research analysis. He has been covering myriad technology categories for BCC Research for more than 15 years. McWilliams has a BA from Princeton University and an MA from Harvard University. He has worked in more than 40 countries and he resides in the greater Boston area. His select reports include: Global Markets for 3D Printing (IAS102B), Advanced Materials for 3D Printing: Technologies and Global Markets (AVM101B), Global Markets for Telemedicine Technologies (HLC014H),The Market for Thermal Management Technologies (SMC024K) and Powder Metallurgy: Technologies and Global Markets (AVM007M).
Related Reports
Advanced Materials for 3D Printing: Technologies and Global Markets
The global advanced materials for 3D printing market should reach $2.5 billion by 2022 and more than $6.5 billion by 2027, with a compound annual growth rate (CAGR) of 20.7% during the forecast period of 2022-2027.
Powder Metallurgy: Global Markets
The global market for powder metallurgy (metal powder + P/M parts) technology reached $26.7 billion in 2021. The market should grow from $27.8 billion in 2022 to $34.0 billion by 2027, at a compound annual growth rate (CAGR) of 4.1% during 2022-2027.
3D Food Printing
The global 3D food printing market should grow from $485.5 million in 2020 to $1.0 billion by 2025, at a compound annual growth rate (CAGR) of 16.1% for the period of 2020-2025.
Metal and Ceramic Injection Molding
The global market for metal and ceramic injection molding will grow from nearly $3.0 billion in 2018 to $5.0 billion by 2023 with a compound annual growth rate (CAGR) of 11.0% for the period of 2018-2023.
Recent Reports
Global Aircraft Recycling Market
The global market for aircraft recycling is expected to grow from $4.7 billion in 2023 and projected to reach $9.7 billion by the end of 2028, at a compound annual growth rate (CAGR) of 15.8% during the forecast period of 2023-2028.
Global Recycled Concrete Market
The global market for recycled concrete is expected to grow from $11.1 billion in 2023 and is projected to reach $17.4 billion by the end of 2028, at a compound annual growth rate (CAGR) of 9.3% during the forecast period of 2023 to 2028.
Global Bio-based Leather Market
The global market for bio-based leather is estimated to increase from $668.6 million in 2023 to reach $902.4 million by 2028, at a compound annual growth rate (CAGR) of 6.2% from 2023 through 2028.
Global Textile Recycling Market
The global market for textile recycling is expected to increase from $8.0 billion in 2023 to $11.1 billion by the end of 2028, with a compound annual growth rate (CAGR) of 7.0% during the forecast period of 2023-2028.
Global 3D Printing High-Performance Plastics Market
The report provides an overview of the global 3D printing high-performance plastics market and its related segment. The report has been segmented based on type, technology, end-user, and region. Using 2022 as the base year, the report provides estimated market data for 2023 through 2028. The report examines the current trends, market drivers, and challenges within the 3D printing high-performance plastics market.
Top Trending Reports
Cell and Gene Therapy Tools, and Reagents: Global Markets
The global market for cell and gene therapy tools and reagents is estimated to grow from $8.3 billion in 2022 to $13.7 billion in 2027, with a compound annual growth rate (CAGR) of 10.6% for the period of 2022-2027.
World Markets for Fermentation Ingredients
The global fermentation-derived fine chemicals market should reach $42.4 billion by 2027 from $32.0 billion in 2022 at a compound annual growth rate (CAGR) of 5.8% for the forecast period of 2022 to 2027.
Digital Pathology: Technologies and Global Markets
The global digital pathology market is estimated to increase from $5.9 billion in 2022 to reach $10.7 billion by 2027, at a compound annual growth rate (CAGR) of 12.5% from 2022 through 2027.
Smartphone-Based Patient Monitoring: Global Market
The global smartphone-based patient monitoring market should reach $21.5 billion by 2027 from $6.8 billion in 2022 at a compound annual growth rate (CAGR) of 25.9% for the forecast period of 2022 to 2027.
Seawater and Brackish Water Desalination
The global market for seawater and brackish water desalination is estimated to increase from $14.7 billion in 2022 to $21.7 billion by 2027, at a compound annual growth rate (CAGR) of 8.1% from 2022 through 2027.
Become A Member
BCC Research offers a comprehensive library of reports, granting members unlimited access to data, insights, and market intelligence for informed business decisions, while actively supporting members in their evolving journeys and prioritizing high-quality, relevant topics based on continuous engagement with the research community.
Find Out MoreCustom Consulting
BCC Research emphasizes the importance of organizations leveraging highly customized market insights aligned with specific strategic business objectives through direct engagement with primary sources and proprietary forecasting models for profitable decision-making in maximizing growth opportunities and minimizing risks.
Customize NowScorecard
The Venture Scorecard provides commercialization offices and decision makers with expert analysis, offering strategic insights crucial for aligning objectives with market realities at various stages of commercializing new products or evaluating investment opportunities, from opportunity assessment to growth planning.
Find Out MoreInnovation Spotlight
Our industry experts offer strategic guidance to maximize the market potential of commercialized products, patents, and IP by providing insights into market trends, competitive dynamics, and effective positioning, using the Innovation Spotlight service for enhanced exposure to thought leaders and the wider community.
Find Out More