Report Highlights
- The U.S. ballistic and ancillary protective gear market was $1.3 billion in 2010 and is expected to reach $1.4 billion in 2012. This figure is projected to reach $1.9 billion in 2017 yielding a compound annual growth rate (CAGR) of 5.8% between 2012 and 2017.
- The protective head gear sector within the U.S. was $781 million in 2010 and is expected to reach $860 million in 2012. The projected estimate for 2017 is $1.1 billion given a CAGR of 4.8% between 2012 and 2017.
- The ballistic body and vehicle armor and gear sector in the U.S. was $508 million in 2010 and is expected to reach $587 million in 2012. The sector should increase at a CAGR of 7.2% to reach $832 million in 2017.
INTRODUCTION
SCOPE OF REPORT
The markets for protective ballistic gear and armor markets remain a fragmented industry. There are significant and specific segments of the protective gear and armor industry designed to perform specific tasks and are rated as to their effectiveness. Within each of those segments are a variety of players, including government organizations that create, develop and enforce regulations and standards, raw material suppliers, fiber and fabric manufacturers, mills and fabric producers, finished goods manufacturers, and suppliers and distributors. The supply chain is complex. The focus of this report is on the major equipment designers and suppliers of the products. To emphasize the complexity, it may be that one large corporation through many of its divisions and business units can be involved in all sectors of the supply chain.
What is termed “body armor or bulletproof armor” is better termed as individual ballistic protection. There are strict NIJ (National Institute of Justice) standards that body armor must meet for various levels of protection. Vehicular armor includes bullet and fragmentation-resistant vehicles, up-armored and purpose built vehicles that are used in both law enforcement and military applications. The retrofitting of the vehicles uses the same types of materials and some of the newer engineered in-place vehicle armor.
In this report, BCC Research identifies the top 10 companies in the ballistic and blast protection market. Factors taken into account included technical innovations, market leadership and commitment to this market via investment in products. In selecting these top 10 companies, BCC Research looked across the industry spectrum and selected the most active and significant contributors while recognizing that there are other contenders in this very complex and multifaceted market sector. Some of these “significant others” are included but to a less detailed extent than the top 10 companies that are the focus. The levels of ownership are more detailed for the “top 10.”
Although there are frequent mentions in military documents and in the popular press concerning nuclear, biological and chemical (NBC or NBCR) equipment, this is excluded from our discussion. There is no truly protective clothing for severe nuclear threats such as a battlefield nuclear explosion or a Chernobyl-level nuclear accident. When gamma rays are present in force and quantity, the effective absorbers might be lead or the misnomer “depleted” uranium. Respirators and clothing do help, but the best solution is situational awareness.
METHODOLOGY AND INFORMATION SOURCES
A structured approach is based on optimal use of BCC Research’s own databases and proprietary information, as well as primary and secondary research techniques and methodologies. The material researched and presented in this technical market report is based on information gathered from personal contacts within government agencies, individuals involved in materials and manufacturing, industry consultants, and to some degree, on the authors’ personal experience in speaking with industry sources knowledgeable in the subject material.
Additional data was obtained from reviews of secondary sources, such as trade publications, trade-associated company literature, government documents and patents. This was done in an effort to supplement the application, market, and trend data gathered from primary sources. SEC filings offer an insight into the trend for acquisitions and mergers. Monetary projections presented in this report are reported in constant U.S. dollars. A targeted and selective use of recent patents is encompassed into the document.
ANALYST CREDENTIALS
Anna Welch Crull, a chemist and experienced private consultant, is qualified in electrochemistry, polymers, membrane materials and advanced materials. Ms. Crull has worked with BCC Inc. (now BCC Research) for more than 30 years and has authored more than 114 technical/marketing reports, helped establish 10 technical newsletters, and assisted in numerous special consulting studies and conferences for more than 35 corporations and supplied business intelligence and research for U.S. government entities. She has worked for the U.S. Army Materials Command on rocket technology, propellants and explosives. Ms. Crull is a graduate of the School of Engineering, University of Mississippi and holds a master’s degree in Chemistry from the University of Missouri.
ABOUT BCC RESEARCH
BCC Research is an information resource producing high-quality market research reports, newsletters and conferences. BCC’s information products explore major market, economic, scientific and technological developments for business leaders in industrial, pharmaceutical and high technology organizations. Industry analysis and market forecasts for advanced materials, high-tech systems and components, nanotechnology and novel processing methods are at the forefront of the company’s expertise. The company publishes daily, monthly, bimonthly and quarterly subscription-based newsletters in areas such as energy, environmental, fuel cells and transportation. BCC Research’s in-depth market analysis has provided businesses with the insight needed to make intelligent and strategic business decisions.
BCC ON-LINE SERVICES
BCC Research offers an online information retrieval service. Its home page, located at www.bccresearch.com, enables readers to:
- Examine the complete BCC Research catalog of market research reports and place direct orders.
- Subscribe to any of BCC Research’s many industry newsletters.
- Read announcements of recently published reports and newly launched newsletters.
- Register for its well-known conferences.
- Request additional information on any BCC research product.
- Take advantage of special offers.
DISCLAIMER
The information developed in this report is intended to be as reliable as possible at the time of publication and of a professional nature. This information does not constitute managerial, legal or accounting advice, nor should it serve as a corporate policy guide, laboratory manual or an endorsement of any product, as much of the information is of a speculative in nature. The author assumes no responsibility for any loss or damage that might result from reliance on the reported information or from its use.
Related Reports
Recent Reports
Advanced Materials for Extreme Environments: Global Markets
The global market for advanced materials for extreme environments reached $3.2 billion in 2023. This market is expected to grow from $3.4 billion in 2024 to $4.5 billion by 2029, at a compound annual growth rate (CAGR) of 5.8% from 2024 to 2029.
Sustainable Fabrics: Global Markets
This report provides an overview of the global sustainable fabrics market and a detailed analysis of the market player’s products and strategies. It presents analyses of the global market based on material type, application and region. Using 2023 as the base year, the report provides market estimates for 2024 through 2029.
Advanced Materials for 3D Printing: Technologies and Global Markets
The global market for advanced materials for 3D printing is estimated to increase from $3.3 billion in 2023 to reach $8.6 billion by 2029, at a compound annual growth rate (CAGR) of 18.1% from 2024 through 2029.
Wire and Cable: Materials, Technologies and Global Markets
The global market for wire and cable is expected to grow from $254.0 billion in 2024 and is projected to reach $387.3 billion by the end of 2029, at a compound annual growth rate (CAGR) of 8.8% during the forecast period of 2024 to 2029.
Global Bio-based Composite Material Market
The global market for bio-based composite materials is estimated to increase from $5.9 billion in 2023 to reach $9.0 billion by 2029, at a compound annual growth rate (CAGR) of 7.4% from 2024 through 2029.
Top Trending Reports
Single-use Technologies for Biopharmaceuticals: Global Markets
The global market for single-use technologies for biopharmaceuticals is expected to grow from $6.5 billion in 2024 and is projected to reach $11.2 billion by the end of 2029, at a compound annual growth rate (CAGR) of 11.6% during the forecast period of 2024 to 2029.
Cell and Gene Therapy Tools, and Reagents: Global Markets
The global market for Cell and Gene Therapy (CGT) Tools and Reagents is estimated to increase from $10.0 billion in 2024 to reach $16.7 billion by 2029, at a compound annual growth rate (CAGR) of 10.8% from 2024 through 2029.
Chronic Disease Management: Therapeutics, Device Technologies and Global Markets
The global market for chronic disease management therapeutics and device technologies was valued at $675.0 billion in 2023. It is projected to grow from $726.3 billion in 2024 to $1.1 trillion by 2029, at a compound annual growth rate (CAGR) of 8.1% from 2024 through 2029.
Global Market Opportunities and Competitive Landscape for CDMO
The global CDMO market was valued at $128.0 billion in 2023. This market is expected to grow from $136.6 billion in 2024 to $191.6 billion by the end of 2029, at a compound annual growth rate (CAGR) of 7.0% from 2024 to 2029.
CRISPR Technology: Global Markets
The global market for CRISPR technology was valued at $3.4 billion in 2023. This market is expected to grow from $3.8 billion in 2024 to $7.5 billion by the end of 2029, at a compound annual growth rate (CAGR) of 14.4% from 2024 to 2029.
Become A Member
BCC Research offers a comprehensive library of reports, granting members unlimited access to data, insights, and market intelligence for informed business decisions, while actively supporting members in their evolving journeys and prioritizing high-quality, relevant topics based on continuous engagement with the research community.
Find Out MoreCustom Consulting
BCC Research emphasizes the importance of organizations leveraging highly customized market insights aligned with specific strategic business objectives through direct engagement with primary sources and proprietary forecasting models for profitable decision-making in maximizing growth opportunities and minimizing risks.
Customize NowScorecard
The Venture Scorecard provides commercialization offices and decision makers with expert analysis, offering strategic insights crucial for aligning objectives with market realities at various stages of commercializing new products or evaluating investment opportunities, from opportunity assessment to growth planning.
Find Out MoreInnovation Spotlight
Our industry experts offer strategic guidance to maximize the market potential of commercialized products, patents, and IP by providing insights into market trends, competitive dynamics, and effective positioning, using the Innovation Spotlight service for enhanced exposure to thought leaders and the wider community.
Find Out More